Gear Retract System
Highest standard Gear Advisory System
- Battery Float Charger Assembly & Operating Instructions Thank you for purchasing this Battery Float Charger. This manual provides important information regarding safety, operation, maintenance and storage. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice.
- FLOAT MANUAL V2.20200820.1 Congratulations with obtaining your Float! Our product will help you to get more detailed information about your fermentation process. Each Float is individually calibrated at laboratory conditions.
- This manual describes how to identify and assemble the components of the Mag Plus Probe Phase-Two Float Kit on either a new Mag Plus probe or an existing Mag Plus probe (for retrofit restrictions, see Note 2 in the “Important Requirements for Phase-Two Float Kit” paragraph below).
AIR-TECH, Inc owner Gene Borne has been building and flying floats for ultralight aircraft since 1980, and we have the experience. Our float design is simple and it works. The Louisiana swamps have been our test bed for over a decade and we can take it. Maintenance Aircraft Sales Services Parts Edo Floats Flight Instruction Airline EDO FLOAT INFORMATION. PDF's AVAILABLE FOR DOWNLOAD. Edo Model 88-1650 Float Installation for Cessna 120 and 140, (1948 DESIGN) Model 89-2000 Float Installation for Piper PA-12, (1948 Design). Edo 2000 Floats. Scott 3400D Bow Wheel with New Tire for EDO Floats.
- Audible announcement for gear positions and “check gear” conditions
- Hydraulic pump running indicator
- Illuminated indicators for each gear wheel and each position
- Backlit display for easy reading
- Dimmer adjustment
- Indicator lights “Test” feature
- Acknowledged by both pilots and aviation officials, keeping safety a top
priority.
Electric Hydraulic Pump System
- 12 or 24 volt availability
- Far aft placement for nose gear CG compensation
- Low average pressure (500 psi) is easy on the lines reducing overall
maintenance - Built in pressure relief guards against over pressure from thermal or
hand pump inputs - Simplistic reversing motor eliminates complex flow control valves and
systems - Reservoir and site glass are built into hydraulic power pack for easy fluid
level reading - Internal filters to guard against debris in hydraulic system reducing wear
Mounting hardware designed and tested to FAR requirements
Main Gear
Custom Designed Gearbox
- Minimizes displacement for improved floatation.
- Watertight seamless design means less water pumping.
- Easy access to all hardware, reducing maintenance time.
- Easy-to-clean and service, ease of replacements.
Oleo Shock System
- Trailing arm link provides a no-bounce smooth ride.
- Metering pin tailored toward comfort during taxi, yet able to handle harsh landings.
- Pressure adjustable to match aircraft gross weight.
- Built in prevention of water infusion.
- Cost effective, easy to find and replace “off-the-shelf” seals and wiper rings.
- Aerocet®-manufactured nose wheel means Aerocet® quality, and we always have parts in stock.
Nose Gear
Sliding, Retractable Gear
Floats Money
- Utilizes a no-maintenance composite spring that eliminates soft forward diving in crosswinds or under braking.
- No nose wheel well, which provides maximum displacement efficiency.
- Aluminum bronze slide bushings designed to handle ultimate loads without breakage.
- Tire retracts to provide bumper.
- Angle of nose spring is optimized to reduce shimmy potential.
Nose Wheel Assembly
- Aerocet®-manufactured nose wheel means Aerocet® quality, and we always have parts in stock.
- Spoked wheel design eliminates water cavity.
- O-ring interface between wheel halves for better sealing and less maintenance.
- Standard “off-the-shelf” bearings.
- Manufactured from 6061 billet, anodized and top coated for long life corrosion protection.
- Fully TSO approved by the FAA.
Composites
Performance
- Super large sweet spot, ease of use and the most forgiving floats for novice and pro alike.
- Very slippery – minimal sensation of acceleration is felt after leaving the water.
- Getting on the step is reached very quickly to get you off the water and into the air fast.
Hull Design
- Double fluted design delivers superior strength to weight ratings.
- Molded – in boarding steps.
- Sharp edges for reduced drag and increased hydrodynamics.
- Large flat deck with molded – in antiskid.
- Best design for performance in both rough water and smooth water conditions.
Construction
- No corrosion.
- No rivets mean no rivet leaks.
- Common aerospace E-Glass and simple easy – to – use vinyl ester resin.
- Non – sandwich bottom skin, makes any field repair an easy process.
- High impact sandwich core used on top and sides adds durability and strength.
Compartments
- Six Watertight Compartments
- One more compartment than most other floats on the market.
- No large holes for rudder controls, which could cause easy flooding.
- Large access panels with integrated preflight pumpouts that use all stainless hardware.
- Storage locker built into center compartment with super large access door and optional floorboards for flat storage.
IS Flexible Float Level Transmitter For Tall Tanks
The MPI-F features a 316L SS flexible tubing braided stem that uncoils easily for simple installation in tall tanks.
Titanium Float Level Transmitter, Intrinsically Safe
With a 1'∅ titanium stem, Class I Div 1 and Class I Zone 0 approvals, and floats that just don't get stuck, the MPI-T is built to…
Float Manufacturer
API 18.2 Custody Transfer Level Probes
The MPX-R offers a 1'-diameter, stainless steel stem, while the MPX-T uses a 1'-diameter titanium stem for a larger range of chemical…
Intrinsically Safe Float Level Transmitter
Both the 0.5'∅ MPI-E and the 1.0'∅ MPI-R are built for long-lasting, dependable performance in harsh applications and…
Flexible Magnetostrictive Float Level Transmitter
The MPX-F features a 316L SS flexible tubing braided stem that uncoils easily for simple installation in tall tanks.
Explosion Proof Float Level Transmitter
The MPX-E’s light weight design makes it ideal for applications where space is limited, while the MPX-R’ s large, robust floats and stem…
Chemically Resistant Level Transmitter
With a chemical resistant coating and a Kynar® float, the MPX-E Chemical delivers precision measurements in corrosive, acidic and…
IS Float Level Transmitter For Harsh Environments
With a coating to keep the probe safe in corrosive liquids, and Intrinsic Safety ratings to keep your job site safe, the MPI-E Chemical…
Floats Movie
Explosion Proof Resistive Level Transmitter - 1'
Edo Floats Manual
The RPM is made to work for you and is completely customizable for your needs including: probe length, float type, specific gravity, and…
Explosion Proof Resistive Level Transmitter - 1/2'
Floats Mocking Trump
Every bit as durable as it's bigger brother, the RPM, the RP is designed for smaller tanks, up to 8 ft. (RPX) or 12.75 ft. (RPE) in…